Pro Stock Tractor

1. Chassis
* Can be factory production or a scratch built unit.  
* Any gearbox or combination of gear reduction units can be used.         
*2WD only.

2. Hitch
* Maximum hitch height will be 4 inches.

3. Body
* Body must resemble a full size pro-stock or super stock tractor.  
* Body can be slightly smaller or larger than true 1/10 scale, this will allow a wider variety of tractors to be used.  
* Size must look appropriate for the wheel base.   

4. Dimensions
* Maximum length will be 19 inches, measured from the rear of the hitch to the most forward part of the truck.  
* Maximum wheel base will be 11½ inches.  
* To be no more than 15 1/2 inches from the centerline of the rear axle to the furthest point forward.

5. Motor
* Any single motor listed as small.

6. Battery
* Maximum of 7cells.
* Must be under the body.

7. Wheels
* Front tires minimum size will be 2 inches in diameter.
* Rear drive tires can be maximum of 6½ inches in diameter and maximum of 4½ inches in width.

8. Weight
* Maximum vehicle weight will be 10 pounds.

Back